Groundhog

Floodline Groundhog

The Floodline Groundhog combines Point Sensor and detection circuitry in one small package. Self-contained single-zone leak detection system ideal for interconnection to Building Management Systems and other control/alarm systems.

The Groundhog can be placed directly onto a floor or drip tray or mounted vertically at the base of a wall and provides a volt-free contact relay output when water activates the unit.

Additional Floodline pointsensors or leak detection tape can be slaved off the groundhog.

Kenmerken

The Groundhog can be extended by connecting additional standard Floodline leak sensors via a built-in jack-plug socket.

Green “Power On” LED indicates ready/stand-by condition.

Red LED: flashes when a leak is detected, volt-free contact change-over relay acttivates.

Water touches across stainless steel probes - red “Leak” LED flashes, volt-free contact change-over relay activates.

Unit supplied with change-over volt free N/O (normally open) or volt free N/C (normally closed) relay.

Multi-voltage 12 or 24v, AC or DC

Option 1: Automatic - unit self resets when water removed.
Option 2: Manual

Completely encapsulated to withstand immersion and built into a stainless steel Guard Plate which provides protection and assists fixing.

Length 130 mm, width 90 mm, depth 37 mm.

A site wire-able plug is provided to which any length of suitable Leader Cable can be attached. [Standard PVC/PVC 7/0.2 alarm/comms or similar. LSF or other light cables can be substituted as required.]

Fixed or free standing on floor or in drip tray, vertically at base of wall or plant.